Bimba IntelliSens Bedienungsanleitung PDF herunterladen (Seite 41)

IntelliSense

Manual

Alert Data – The following will output the state of the alarm at the time of the measurement. A value of 1

indicates that the alert was active, and 0 indicates that the alert was off.

Line Pressure High Line Pressure Low Sensor 1 Press High

Sensor 2 Press High Sensor 1 Press Low Sensor 2 Press low

Sensor 1 Temp High Sensor 1 Temp Low Sensor 2 Temp High

Sensor 2 Temp Low Extend Time Low Extend Time High

Retract Time Low Retract Time High Rear Seal Failure

Front Seal Failure Rod Seal Failure

To export the logged data:

1. Select the Pressure and Date Export option button

Figure 48: Export option

2. The eld selector will appear. On the right is a list of all of the available pieces of data. On the left is a grey

area where the desired elds can be dragged.

Figure 49: Export eld selector

3. By default, the export le will contain the measurement time and the two pressure measurements, P1

and P2. To add any of the available elds/columns to the exported le, press the left button over the re-

quired eld and drag it to the space to the left. The “Select All” command moves all of the column names

to the left column, adding them to the export report, and the “Clear” command clears any selected

column names.

Figure 50: Select variable to export

4. Items in the list can be rearranged to represent the column order in the exported le from left to right.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 67 68

Keine Kommentare

Bimba IntelliSens Bedienungsanleitung Seite 41